Zircon MultiScanner® L550c OneStep® Scanner
Product code: 310216
New
£100
Currently in Stock
Delivery
Within 3 days from our supplier
Supplier delivery
The MultiScanner® L550c OneStep® locates studs, metal, and live AC electrical wiring behind walls, floors, and ceilings. The advanced ColorTrip™ display lights green in stud scan, blue in metal, and red in live AC scan. Screen flashes, or lights red, to alert the presence of live AC in stud, DeepScan®, and metal scan modes. A 4-mode switch makes it easy to change modes, while the ultra-bright display screen, patented SpotLite® pointer, and audio tone all indicate the location of the target. Requires a 9V battery (not included).
Read more
Read less
Saved to Project List
Zircon MultiScanner® L550c OneStep® Scanner
added to "My Project List".
You are not logged in to save your list permanently. Until you log in, your list will be saved temporarily and can only be accessed from the device you are using now.
Supplier delivery
Product details
- Height: 0.05 mm
- Length: 308 mm
- Width: 146 mm
- Weight: 0.30 kg
- Battery Type: Alkaline
- Type: Stud sensors
- Manufacturer Model No: ZIR-L550C
- Country Origin: USA
- Brand Name: Zircon
Features & benefits
- StudScan mode locates the centre, edges, and direction of wood or metal studs up to 19mm deep. DeepScan® mode doubles the scanning depth to 38mm deep
- WireWarning® detection indicates the presence of live, unshielded AC electrical wiring up to 51mm deep
- AC scan mode locates live, unshielded AC electrical wiring up to 51mm deep
- ACT™ (auto correcting technology) automatically corrects common errors, such as when scanning begins over a stud
- ColorTrip™ display with Target Spotlight indicates the direction and edge of the stud and illuminates when the centre of the stud is detected
- SpotLite® pointer shines an arrow-shaped light on the wall to clearly indicate the centre of the stud
- “V” marker groove for more accurate marking of target location
- Requires 9V battery (not included)
- Rubber handle for non-slip grip
- Cable, stud and pipe detectors can be really helpful in identifying the location of hidden building elements. However, certain materials, environmental conditions and operator technique can affect accuracy of measurement. Use of these devices should be as a guide only, refer to building plans and other sources of information for accurate location of pipes and electrical cables in particular. Always ensure supplies are shut off and proceed with caution