£5.30
£0.06 per M
Excluding delivery
Offer ends today
Coving & Plasterboard Adhesive and Tapes
Discover our wide collection of plasterboard adhesives and tapes, and our specialist coving adhesive. Plaster adhesives are ideal for providing high-strength and lasting bonds for attaching plasterboard to walls and ceilings, whereas tapes strengthen joints and prevent cracking.
Find Out More
Our plasterboard adhesives and tapes are designed to accomplish smooth and secure results in drywall. If you're undergoing a decorative project, our coving adhesive creates a clean and seamless attachment, ready for customising with paint. All of our plaster and joint tape is easy to apply and work with, allowing you to achieve immaculate results efficiently and effectively.
FAQs
How long does plasterboard adhesive take to dry
It’ll depend on the brand, thickness and environment its drying in, but it usually takes 3 to 6 hours to set and then up to 24 hours to fully dry.
How do you tape plaster joints?
All you need to do is apply the joint compound over the seam before pressing in the tape, smoothing it over with compound and letting it dry. For smooth results, sand it down and repeat the process if required.
Can I use plasterboard adhesive for coving?
Yes, it’s possible to use plasterboard adhesive for coving, but it’s recommended that you use specialist coving adhesive as it provides a better grab and hold on vertical surfaces.
Similar products
The STS Professional Tile Backer Board is a lightweight insulation board used as a tile backer in wet areas. Easy to cut and install, making walls and floors easier to tile, especially good for creating special bathroom features.Read more
This Drybase Butyl Tape is double sided and waterproof, and is suitable for sealing between overlapping flange joints of cavity drainage membranes. The tape remains flexible throughout its life so longevity is ensured, providing peace of mind that the job ...Read more
The British Gypsum Thistle Bonding Coat Plaster is an undercoat plaster that is ideal for smooth and low suction backgrounds, including dense blocks, plasterboard, painted or tiled surfaces. The plaster comes with a finer mix to achieve a great workability ...Read more
The STS Intumescent Sealant and Adhesive is designed for sealing joints, voids/irregular holes in walls, partitions, and other structures, resulting in an airtight and watertight seal. This fire retardant sealant is a high-performance, professional quality, one part ready-to-use sealant and ...Read more