Setcrete Universal Floor Levelling Compound - 20kg
Product code: 112754
Autumn Saver
£15
£0.75 per KG
You Save £6
Currently in Stock
Delivery
Next day available
Product added for Click & Collect
Product has not been added for Click & Collect
FREE Click & Collect within 30 minutes
Nearest Store
More Stores
Quantity:
1
£15
Stores with both stock and Click & Collect near .
Our stock moves fast! Secure your product now with Click & Collect.
Standard delivery
Click & Collect from store within 30 minutes - FREE
The Setcrete™ Universal Floor Levelling Compound is an easy to use floor levelling compound, that is suitable for use over a wide range of absorbent sub floors including sand/cement screed and concrete. It is designed for use prior to the installation of a floor covering, in areas of light foot traffic.
Read more
Read less
Saved to Project List
Setcrete Universal Floor Levelling Compound - 20kg
added to "My Project List".
You are not logged in to save your list permanently. Until you log in, your list will be saved temporarily and can only be accessed from the device you are using now.
Standard delivery
Click & Collect from store within 30 minutes - FREE
Product details
- Size: 20 kg
- Coverage: 3.8m2 at 3mm
- Application Thickness: 3-6 mm
- Drying Time: 24 hours
- Walk On Hardness Time: 3 hours
- Working Time: 15-20 minutes
- Colour: Grey
- Type: Floor levelling compounds
- Certifications Met: GEV-EMICODE¨ EC1PLUS R- very low emission
- Brand Name: Setcrete
Features & benefits
- An easy to use floor levelling compound, just add water in correct quantity as directed, mixing with a suitable mixing paddle and drill for a minimum of 2 minutes
- The product can be applied in one application to depths between 3mm and 6mm
- Setcrete™ universal takes approximately 24 hours at to fully dry, so that floor coverings can be laid on top. However, after 3 hours it is hard enough for you to walk on
- Setcrete™ universal is suitable to use over a wide range of absorbent sub floors, which should first be coated with Setcrete™ acrylic primer diluted in a ratio of 1 part primer to 4 parts water
- For non-absorbent sub floors, the surface should first be primed with undiluted Setcrete™ acrylic primer
- The working time for use is approximately 15-20 minutes at 20°, depending upon the sub floor absorbency, ambient temperature and humidity. Do not mix more than one bag at a time
- Setcrete™ universal is not suitable for use when bonding solid wood flooring. All other Setcrete™ floor levelling compounds are suitable for installation of this type of flooring
- For further information and technical advice regarding the use of Setcrete™ universal, please email the technical services department – contact@setcrete.co.uk
- Always read the instructions