Setcrete Rapid Setting Floor Levelling Compound - 16kg
Product code: 132009
£34
£2.13 per KG
Currently in Stock
Delivery
Next day available
Product added for Click & Collect
Product has not been added for Click & Collect
FREE Click & Collect within 30 minutes
Nearest Store
More Stores
Quantity:
1
£34
Stores with both stock and Click & Collect near .
Our stock moves fast! Secure your product now with Click & Collect.
Standard delivery
Click & Collect from store within 30 minutes - FREE
Setcrete™ Rapid Set 30 is a rapid setting, rapid drying floor levelling compound for use in light to heavy duty internal areas prior to the installation of new floorcoverings.
Setcrete™ Rapid Set 30 utilises the latest advances in cement technology to achieve a walk-on time of as little as 30 minutes, and its rapid drying formula means that new floorcoverings can be installed from just 2 hours. As it is a water mix, it also offers the advantages of being economical and latex free.
Read more
Read less
Saved to Project List
Setcrete Rapid Setting Floor Levelling Compound - 16kg
added to "My Project List".
You are not logged in to save your list permanently. Until you log in, your list will be saved temporarily and can only be accessed from the device you are using now.
Standard delivery
Click & Collect from store within 30 minutes - FREE
Product details
- Size: 16 kg
- Coverage: 5.6m2 at 2mm
- Application Thickness: 2-10 mm
- Drying Time: 45 minutes
- Walk On Hardness Time: 30 minutes
- Working Time: 10-15 minutes
- Colour: Beige
- Type: Floor levelling compounds
- Certifications Met: GEV-EMICODE¨ EC1PLUS R- very low emission
- Brand Name: Setcrete
Features & benefits
- An easy to use floor levelling compound, just add water in correct quantity as directed, mixing with a suitable mixing paddle and drill for a minimum of 2 minutes
- Setcrete™ rapid set 30 has excellent self-levelling properties and can be applied at thicknesses between 2-10mm
- The floor levelling compound must be left uncovered for a minimum of 2 hours before installing a floor covering, when applied at 2-10mm. However, typically after 30 minutes it should be hard enough for you to walk on
- Setcrete™ rapid set 30 is suitable to use over a wide range of absorbent sub floors which should first be coated with Setcrete acrylic primer diluted in a ratio of 1-part primer to 4 parts water
- For non-absorbent sub floors, the surface should first be primed with undiluted Setcrete acrylic primer to promote adhesion
- The working time for use is approximately 10-15 minutes at 20°, depending upon the sub floor absorbency, ambient temperature, and humidity. Do not mix more than one bag at a time
- For further information and technical advice regarding the use of Setcrete™ rapid set 30, please email the technical services department – contact@setcrete.co.uk
- Always read the instructions