Setcrete Latex Floor Levelling Compound - 20kg
Product code: 133779
15 for £345
£26.50
£1.33 per KG
15 for £345
Offer price equivalent to £23.00 per item
Currently in Stock
Delivery
Next day available
Product added for Click & Collect
Product has not been added for Click & Collect
FREE Click & Collect within 30 minutes
Nearest Store
More Stores
Quantity:
1
£26.50
Stores with both stock and Click & Collect near .
Our stock moves fast! Secure your product now with Click & Collect.
Standard delivery
Click & Collect from store within 30 minutes - FREE
The Setcrete™ Latex Floor Levelling Compound is suitable for use in light to medium traffic internal areas prior to the installation of new floorcoverings. It is also suitable for use over a wide range of absorbent and non-absorbent subfloor types providing they are sound, well adhered, and suitably prepared. Setcrete Latex can be applied at thicknesses between 2-10mm.
Read more
Read less
Saved to Project List
Setcrete Latex Floor Levelling Compound - 20kg
added to "My Project List".
You are not logged in to save your list permanently. Until you log in, your list will be saved temporarily and can only be accessed from the device you are using now.
Standard delivery
Click & Collect from store within 30 minutes - FREE
Product details
- Size: 20 kg
- Coverage: 5.75 m2
- Application Thickness: 2-10 mm
- Drying Time: 24 hours
- Walk On Hardness Time: 2 hours
- Working Time: 15-20 minutes
- Colour: Grey
- Type: Floor levelling compounds
- Certifications Met: GEV-EMICODE¨ EC1PLUS R- very low emission
- Brand Name: Setcrete
Features & benefits
- An easy to use floor levelling compound, just add water in correct quantity as directed, mixing with a suitable mixing paddle and drill for a minimum of 2 minutes
- Setcrete latex is self-smoothing and can be applied at thicknesses between 2-10mm
- Drying is dependent upon the absorbency of the sub floor, ambient temperature, and humidity. However, after 2 hours it should be hard enough for you to walk on
- Before applying a floor covering, Setcrete latex should be left uncovered for 24 hours when applied at 2-5mm thickness. For more than 5mm it should be left for 48 hours
- Setcrete latex is suitable to use over a wide range of absorbent sub floors which should first be coated with Setcrete acrylic primer diluted in a ratio of 1-part primer to 4 parts water
- For non-absorbent sub floors, the surface should first be primed with undiluted Setcrete acrylic primer to promote adhesion
- The working time for use is approximately 15-20 minutes at 20°, depending upon the sub floor absorbency, ambient temperature, and humidity. Do not mix more than one bag at a time
- For further information and technical advice regarding the use of Setcrete latex, please email the technical services department – contact@setcrete.co.uk
- Always read the instructions