Pan connectors
Our range of Pan Connectors come in a variety of shapes to allow connection of virtually any pan to any soil pipe.
Create a secure wastage system by conjoining the toilet waste pipe to the toilet with a pan connector. Suppose you’re updating an older wastage system. In that case, you'll find it’s easier and more reliable to replace a cracked or damaged toilet connector than install a new one.
Our pan connectors come in flexible adjustment lengths to accommodate different distances between the toilet pans and waste pipe, including those adapted to fit 32mm waste pipe fittings. Many pan connectors conjoin with push-fit compression pipe fittings to reduce the time expended on traditional fitting installation.
Other waste pipe fittings will join with your toilet connector, but always link the connector with the pan first. Then, connecting it to the wastage system is easier because it’s at the correct height for the toilet pan to drain effectively.
Similar products
The 110mm Black Double Socket Coupling is used to form a push-fit joint between 2 lengths of 110mm soil pipes. This product can also be used as a slip coupling by simply removing the centre stops in the middle of ...Read more
The 110mm Black Soil Access Pipe allows access within the soil stack to enable easy testing, cleaning and maintenance of the soil system. The access has 2 closed side bosses which when drilled using a 50mm - 57mm hole cutter ...Read more
The 110mm Black Soil Pipe Single Socket 3m has a single socket for simple connection to soil systems. The pipe can be cut to length using a fine tooth saw, the cut end should always be chamfered prior to installation ...Read more
The 50mm White Air Admittance Valve should be used in above ground drainage systems to allow the free entry of air into the sanitary pipework without the the escape of foul gases into the building. When installed onto sanitary work ...Read more