FloPlast White Solvent Socket Air Admittance Valve - 110mm
Product code: 431971
£32
Currently in Stock
Delivery
Next day available
Product added for Click & Collect
Product has not been added for Click & Collect
FREE Click & Collect within 30 minutes
Nearest Store
More Stores
Quantity:
1
£32
Stores with both stock and Click & Collect near .
Our stock moves fast! Secure your product now with Click & Collect.
Standard delivery
Click & Collect from store within 30 minutes - FREE
The FloPlast White Solvent Socket Air Admittance Valve should be used in above ground drainage systems to allow the free entry of air into the sanitary pipework without the escape of foul gases onto the building. This air admittance valve not only prevents the loss of water from the trap seals due to induced siphonage, it also provides indicators to a drain blockage and can be used as a secondary rodding point. Solvent weld to 110mm pipe.
Read more
Read less
Saved to Project List
FloPlast White Solvent Socket Air Admittance Valve - 110mm
added to "My Project List".
You are not logged in to save your list permanently. Until you log in, your list will be saved temporarily and can only be accessed from the device you are using now.
Standard delivery
Click & Collect from store within 30 minutes - FREE
Product details
- Standards Met: BS EN 12380
- Product Type: Fittings
- Diameter: 110 mm
- Height: 153 mm
- Length: 153 mm
- Width: 140 mm
- Material: PVCu
- Colour: White
- Years Guaranteed: 1
- Certifications Met: KM512474
- Type: Air admittance valves
- Manufacturer Model No: AV110W
- Brand Name: FloPlast
Features & benefits
- Manufactured in the UK from a combination of durable lightweight PVCu, ABS and rubber
- A1 designated which permits the valve to be fitted below the flood level of connected appliances, however it must be 200mm above the highest wet entry point to the soil vent pipe. Fully tested and operational at temperatures ranging from -20° to +60°
- Approved document H of the building regulations only permits air admittance valves that conform to BS EN 12380:2002
- Compatible with all UK 110mm plastic soil pipes manufactured to BS EN 1329-1 or BS EN 1453
- Can be used as a rodding point
- Internal use only