The Big Event! Offers on Paint, Flooring, Doors & more
Skip to content Skip to navigation menu
Basket
0
1..How-To-Fix-Door-Problems.jpeg

Planning & preparation

  • Door problems can arise for many reasons, but luckily they tend to be quite easy to fix. Here we will show you how to fix loose hinges, ease a sticking door, pack out a hinge and move a doorstop
  • Start by identifying the area of the door that is causing the problems and ensure you have the right tools and materials for the job
  • Seek professional help if a rated fire door is causing problems. Do not plane the edges as these may include fire door strips and seals for your protection in the event of a fire in the home
  • If your door sticks in the lining or frame or rubs on the floor, it tends to be because one or more hinges are loose, or because the door has swollen in damp conditions. Always check the hinges first, as it may not be necessary to alter the door
  • If a door is only slightly sticking and the weather is unusually wet or humid, consider waiting to see if the door eases once conditions improve
  • If a door rattles against the doorstop in a draught, or springs open when closed, the doorstop can easily be repositioned forwards (rattling) or backwards (springing open) to solve these problems
  • If a door is catching on the hinged edge, this can sometimes be fixed by placing cardboard between the hinges and the doorframe. You may need to plane the other edge of the door afterwards
  • A similar packing process can be used to slightly adjust the position of a strike plate that isn’t engaging with the door latch
  • Squeaky or stiff hinges can usually be fixed with a quick squirt of an aerosol lubricant. Open and close the door a few times and the squeak should disappear. Take care to wipe off any excess lubricant before it drips and causes any stains

Do it right

  • If you need to plane close to a door lock or latch, it’s best to remove these first
  • If you plane the edges of a painted door, always use primer and repaint afterwards. This is particularly important for external doors – even if the top and bottom edges are not usually visible
  • A small adjustment to the strike plate with a metal file that enables the door latch to engage properly is an alternative fix when a door is springing open
  • An aerosol lubricant can also be used to ease a door lock that is hard to turn, or a sticking latch mechanism. Again, take care to wipe off any excess before it drips

Staying safe

  • When using a chisel, wear safety glasses or goggles and be sure to chisel away from the body
  • Doors can be heavy so it’s best to ask for help when you are taking a door off its hinges or rehanging one

Fixing a loose hinge

Step 1

A door may ‘bind’ or ‘drop’ if the hinges are loose. If you are lucky, all you need to do is use a screwdriver to tighten the screws.

1.How-To-Fix-Door-Problems-Loose-Hinge.jpeg

Step 2

However, it is likely that one or more of the screws are no longer gripping properly as the wood around it has worn down. Remove the screw(s) that won’t tighten, ensuring the door is still held securely.

2.How-To-Fix-Door-Problems-Loose-Hinge.jpeg

Step 3

Place a little wood glue into the screw hole, then use a hammer to tap a couple of small, thin pieces of wood, such as matches with their heads removed, into the hole. Allow the glue to dry.

3.How-To-Fix-Door-Problems-Loose.jpeg

Step 4

Use a hammer and chisel to tap or trim the matches until they are flush with the hinges.

4.How-To-Fix-Door-Problems-Loose-Hinge.jpeg

Step 5

Finally, replace the screws into the hinges and tighten as normal.

5.How-To-Fix-Door-Problems-Loose-Hinge.jpeg

Ease a sticking door

Step 1

If the door is only sticking slightly, you may be able to solve the problem using coarse sandpaper and a sanding block.

6.How-To-Fix-Door-Problems-Sticking-Door.jpeg

Step 2

If this doesn’t work, you’ll need to use a plane to remove the excess material. First, use a pencil to mark on the door edges all the points that are sticking.

7.How-To-Fix-Door-Problems-Sticking-Door.jpeg

Step 3

If the door is sticking against the top of the frame, or against the floor, unscrew the door from its hinges and secure it into your workbench.

8.How-To-Fix-Door-Problems-Sticking-Door.jpeg

Step 4

Plane enough material from the door to give you sufficient clearance. If the door is painted, then you’ll also need to factor in the additional coats of paint.

9.How-To-Fix-Door-Problems-Sticking-Door.jpeg

Step 5

Use fine sandpaper and a sanding block to smooth off all planed edges.

10.How-To-Fix-Door-Problems-Sticking-Door.jpeg

Step 6

Replace the door and check clearances. If required, remove the door again and make small adjustments. Then apply primer and paint.

11.How-To-Fix-Door-Problems-Sticking-Door.jpeg

Packing out a hinge

Step 1

To increase clearance on the hinge side of the door, remove the screws that hold the bottom hinge to the door frame, then prise out the hinge.

12.How-To-Fix-Door-Problems-Packing-Hinge.jpeg

Step 2

Cut some thick cardboard to the same size as the hinge leaf and place this into the recess in the door frame.

13.How-To-Fix-Door-Problems-Packing-Hinge.jpeg

Step 3

Reattach the bottom hinge with the packing in place, then repeat for the top hinge. Ask a friend to support the door whilst you do this.

14.How-To-Fix-Door-Problems-Packing-Hinge.jpeg

Move a doorstop

Step 1

If the door isn’t shutting properly against the doorstop, use a chisel to gently prise the doorstop away from the rest of the door frame. Take care not to damage the doorstop as you’ll be reusing it.

15.How-To-Fix-Door-Problems-Moving-Doorstop.jpeg

Step 2

Use a hammer to tap the existing nails out of the doorstop. If the nails are damaged or bent, it’s best to replace them with new 30mm lost head nails.

16.How-To-Fix-Door-Problems-Moving-Doorstop.jpeg

Step 3

Use a chisel and/or fine-grade sandpaper to remove raised paint edges where the edge of the doorstop was.

17.How-To-Fix-Door-Problems-Moving-Doorstop.jpeg

Step 4

Close the door and engage the door latch with the strike plate. Then, reposition the doorstop to fit against the door.

18.How-To-Fix-Door-Problems-Moving-Doorstop.jpeg

Step 5

Tap the nails halfway in and check the door closes easily, making sure that it doesn’t rattle or feel like it will spring open.

19.How-To-Fix-Door-Problems-Moving-Doorstop.jpeg

Step 6

Knock the nails flush with the doorstop.

20.How-To-Fix-Door-Problems-Moving-Doorstop.jpeg

Step 7

Use a nail punch to sink the nails in a little further, then fill the holes, sand them down and repaint as necessary.

21.How-To-Fix-Door-Problems-Moving-Doorstop.jpeg